Avisaro WLAN device RS232 with WAGO and LAN (W2R933)
| Description | Details | Software | |
The Avisaro WLAN device transmits your technical data via WLAN
- Transmits and receives data via WLAN
- To bridge distances in the data flow
- Communications between moving units
- Relay stations for longer distances
- With LAN and WLAN connection
- Ready-to-use and easy to configure by Web interface
 |
 |
| Description | Details | Software | |
RS232 Interface
- One RS232-Interface
- Baud rate 1200 bit/s to 1 Mbit/s
- 7/8 data bits
- RTS/CTS and XON/XOFF flow controll
WAGO and LAN Connector type
- RJ45-LAN-Plug for Ethernet
- one WAGO jack
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub available.
WLAN:
- WLAN: 802.11 b/g, Sicherheit: WPA, WEP
- Outdoor: 300 m, Indoor 30-50m
- Infrastruktur Mode: Client + 'Fixed AP'
- Adhoc Mode: Standard + 'Mesh'
- WPS (automatic 'one button' setup)
Power supply:
- via WAGO jacks
- Power supply: 6V - 32V
- Consumption: ca. 1.0 W incl. WLAN
Mechanical data:
- Dimension: 51 x 72 x 24 mm
- Weight: 110 g
- max. temperature: -30°C bis 85°C,
| Description | Details | Software | |
Softwareeinstellungen (Scripte)
Scripts - small soft programs - control the behavior of device. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via webside or via interface. In delivery this device script WR1 is installed by default.
WR1: RS232 to WLAN
This script connects a RS232 interface with WLAN to reach a PC or another Avisaro WLAN device.
more