Avisaro WLAN device CAN with WAGO and LAN (W2C933)
The WLAN device is able to send or receive CAN data via WLAN. It can communicate with any other WLAN station or Avisaro device to bridge distances. By using the Avisaro script language it possible to change formate, select the messages or make any requesting commands. This boxes provides a LAN interface in addition.
 |
Online-Documentation |
| Description | Details | Software | |
The Avisaro WLAN device transmits your technical data via WLAN
- Transmits and receives data via WLAN
- To bridge distances in the data flow
- Communications between moving units
- Relay stations for longer distances
- With LAN and WLAN connection
- Ready-to-use and easy to configure by Web interface
|
 |
| Description | Details | Software | |
CAN Interface
- Two CAN interface
- Massage format 2.0A and 2.0B
- "Listen Only" mode
- Active sending ánd receiving massages
- Baud rate up to 1 Mbit/s
- Load resistance switchable
- Configurable filter
Mechanical data:
- Dimension: 51 x 72 x 24 mm
- Weight: 110 g
- max. temperature: -30°C bis 85°C,
WAGO and LAN Connector type
- RJ45-LAN-Plug for Ethernet
- one WAGO jack
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub available.
Power supply:
- via WAGO jacks
- Power supply: 6V - 32V
- Consumption: ca. 1.0 W incl. WLAN
WLAN:
- WLAN: 802.11 b/g, Sicherheit: WPA, WEP
- Outdoor: 300 m, Indoor 30-50m
- Infrastruktur Mode: Client + 'Fixed AP'
- Adhoc Mode: Standard + 'Mesh'
- WPS (automatic 'one button' setup)
| Description | Details | Software | |
Software settings (Scripts)
Scripts - small soft programs - control the behavior of the WLAN device. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. In delivery this logger script WC1 is installed by default.
more