Building Blocks
Base Module
The Base Module contains the main processing unit for the Avisaro 2.0 products. This module is required in order to get any functionality at all. (
details)
SD Trailor Module
The SD Trailor Modul can be plugged on to the Base Module. The SD Trailor Module contains a slot for SD / SDHC memory cards. The SD Trailor Modul by itself has no functionality and requires a Base Module. ( details)
WLAN Trailor Module
The WLAN Trailor Modul can be plugged on to the Base Module. The WLAN Trailor Module contains the WLAN sender and receiver and a on board antenna. This antenna is activated by a smal pig tail antenna cable. The WLAN Trailor Modul by itself has no functionality and requires a Base Module. ( details)
USB Host Trailor Module
The USB Host Module can be plugged underneath the Base Module. The Module contains the USB Host logic - not to confuse with USB device. USB Host allowes to connect USB sticks, HID devics, etc ... Note, that in most cases, some sort of minimal driver is necassary on the Avisaro Module. This driver is usually some bytes sequence send from a script. Avisaro can help in developing those "minimal driver". USB memory stick are supported without a need for drivers. ( details)
Stacking Base and Trailor Modules
Base Module and Trailor Modules are build to be stacked ontop each other. Just like LEGO Blocks, functionality can be added just as required by the application.
Connector Boards
The connector boards provide plugs and power supply. The modules shown above are stacked on to the connector boards.
The connector boards are used either to get started easily, as a reference for your own application or to be build into the final application.
( details)