Typical parameter which needs to be configured

In most cases, the default configurations fit quite well. If not, those are the typical parameter which needs configuration:

Symbols used here are:

= Command in Command Interface

= Configuration Website

Active Data interface (RS232, CAN, SPI, I2C, ...)

The data interface describes which physical interface is the main path for communication. Through this interface the Avisaro device accepts data and commands. Available are RS232, CAN, I2C, SPI, Ethernet, RS485, FILE, ...

To select the active data interface:

prot

general

Modify RS232, SPI, I2C, CAN settings:

rs232	rs232
spi	spi
i2c	i2c
can	can

Setting: Real time clock

All Avisaro devices provide a real time clock. In some Avisaro devices ("Box" and "Cube") this clock is battery backed - in which case the clock needs to be set only once. To set the date and time use:

time

clock

Network settings (IP, WLAN, ...)

If the Avisaro device is equiped with a network interface such as WLAN or LAN, those settings apply. Each network interface has its own parameter set for IP adress, mask, ... as well as the physical interface parameters such as WLAN ssid, encryption.
WLAN (SSID, encryption, ...) configuration is done with:

wlan

Network (IP, ...) configuration is done with:

ip

Startup behaviour of BASIC Scripts

BASIC Scripting is used to customize the behaviour of the Avisaro products. In most cases, those scripts start automatically when the device is powered up. Change this behaviour with:

run

scripting

Setting: FTP Server

The Avisaro devices provide a build-in FTP server to display and transfer files on a SD memory card. This FTP server is disabled by default. To enable and to modify settings, use:

ftp