Avisaro data logger RS232 as Cube (M21766)
This data logger cube stores one RS232 bus on SD card. The cube is dust and weather resistant.nbsp]The device is fully operational delivered. The data logger has a real-time clock, so that records can be provided in addition with the recording time. The device can be programmed freely through the exchange of the script.
 |
Data sheet |  |
Online-Dokumentation |
| Description | Details | Software | |
Avisaro data logger cube stores your technical information on SD card
- Automatic, stand-alone logging
- Data output on SD card
- Timestamp functionality
- Weather- and dust resistant
- Recording format is selectable: ASCII (CSV format), binary
- Ready-to-use and easy to configure by script and interface
 |
 |
| Description | Details | Software | |
RS232 Interface
- One RS232-Interface
- Baud rate 1200 bit/s to 1 Mbit/s
- 7/8 data bits
- RTS/CTS and XON/XOFF flow controll
Storage media:
- With card slot for SD and
SDHC cards up to 16 GB
- Almost all brands (Exceptions: 
here)
- Card slot protectede underneath the top cover
- FAT32 Data systems, short (8.3)
file names
- Files readable directly at PC
Mechanical data:
- Dimensions: 98 x 64 x 34 mm
- Weight: 110 g
- Class of Resistanz: IP66 (Weather protection)
- Card slot underneath the cover
- max. temperature: -30°C to 85°C,
(observe restrictions of the SD card)
Cube connection type
- Weather and dust resistant cable feeder
- Cable is connected by screw terminal
Power Supply:
- Power Supply: 5V - 32V
- Consumption: ca. 0.5 W
- Real time clock internally buffered
| Description | Details | Software | |
Software settings (Scripts)
Scripts - small soft programs - control the behavior of logger. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. In delivery this logger script MR1 is installed by default.
MR1: Log in to file
This script RS232 stores the data in a file. All data from the RS232 interface are stored in the file "logdata.txt" - just as they are received on the interface. The data will not be changed - as ASCII or binairy. more
MR2: RS232 with timestamp
This script stores RS232 data together with a timestamp in a file. The box has a built-in real time clock. more
MR3: RS232 circular buffer
This script stores RS232 spread on multiple files. With completion of the memory card, the oldest file will be deleted - so a continuous recording is given.