Avisaro data logger RS485/422 cube (M22766)
This data logger cube stores one RS485 bus on SD card. The cube is dust and weather resistant.nbsp]The device is fully operational delivered. The data logger has a real-time clock, so that records can be provided in addition with the recording time. The device can be programmed freely through the exchange of the script.
 |
Short-Manual |  |
Online-Dokumentation |
| Description | Details | Software | |
The Avisaro logger cube RS485 stores you technical data coming from a RS485 interface on SD cards
- Automatic, stand-alone logging
- Data input via RS485 interface
- Additional functions: timestamp, ring storage etc.
- Recording format is selectable: ASCII (CSV format), binary
- Ready-to-use and easy to configure using scripts
 |
 |
| Description | Details | Software | |
RS485 Interface
- Baud rate 1200 bit/s to 1 Mbit/s
- 7/8 data bits
- You can use one RS485 interface
Storage media:
- With card slot for SD and
SDHC cards up to 16 GB
- Almost all brands (Exceptions: 
here)
- Card slot protectede underneath the top cover
- FAT32 Data systems, short (8.3)
file names
- Files readable directly at PC
Mechanical data:
- Dimensions: 98 x 64 x 34 mm
- Weight: 110 g
- Class of Resistanz: IP66 (Weather protection)
- Card slot underneath the cover
- max. temperature: -30°C to 85°C,
(observe restrictions of the SD card)
Cube connection type
- Weather and dust resistant cable feeder
- Cable is connected by screw terminal
Power Supply:
- Power Supply: 5V - 32V
- Consumption: ca. 0.5 W
- Real time clock internally buffered
| Description | Details | Software | |
Software settings (Scripts)
Scripts - small soft programs - control the behavior of logger. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. In delivery this logger script MR1 is installed by default.
MR1: Log in to file
This script RS232 stores the data in a file. All data from the RS232 interface are stored in the file "logdata.txt" - just as they are received on the interface. The data will not be changed - as ASCII or binairy. more
MR2: RS232 with timestamp
This script stores RS232 data together with a timestamp in a file. The box has a built-in real time clock. more
MR3: RS232 circular buffer
This script stores RS232 spread on multiple files. With completion of the memory card, the oldest file will be deleted - so a continuous recording is given.
MR5: Sniffing RS232 Rx/Tx
This script stores Rx of two RS232 interfaces in one file. Thus, a RS232 can be "sniffed" incl. a millisecond timestamp.
more...