Avisaro Data logger CAN with 2x WAGO (M26833)
This data logger stores CAN records on SD card. Two interfaces are connected by industiral WAGO plugs. The device is fully operational delivered. The data logger has a real-time clock, so that records can be provided in addition with the recording time. The device can be programmed freely through the exchange of the script.
 |
Data sheet |  |
Online-Dokumentation |
| Description | Details | Software | |
Avisaro data logger CAN stores your technical data of the CAN interface on the SD card
- Automatic, stand-alone logging
- Data input via CAN interface
- Additional functions: timestamp, ID filters etc.
- Sending of CAN messages
- Recording format is selectable: ASCII (CSV format), binary, CANalyzer (vector)
- Ready-to-use and easy to configure using scripts
 |
|
| Description | Details | Software | |
CAN Interface
- Two CAN interface
- Massage format 2.0A and 2.0B
- "Listen Only" mode
- Active sending ánd receiving massages
- Baud rate up to 1 Mbit/s
- Load resistance switchable
- Configurable filter
Storage media:
- Card slot for SD and
SDHC cards up to 16 GB
- Almost all brands
- FAT32 Data systems, short (8.3)
file names
- Files readable directly at PC
Mechanical data:
- Messurements: 51 x 72 x 24 mm
- Weight: 110 g
- max. temperature: -30°C bis 85°C,
if the SD card manufacturer
made no constraints.
WAGO connector type
- Two port terminals type WAGO 231
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub available
Power supply:
- Via WAGO jack
- Power supply: 6V - 32V
- Consumption: appr. 0.5 W
- Real time clock internally buffered
| Description | Details | Software | |
Software settings (Scripts)
Scripts - small soft programs - control the behavior of logger. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. In delivery this logger script MC5 is installed by default.
MC5: CAN as ASCII with timestamp
This script stores CAN messages as ASCII with a timestamp to a file.
more