NAME

Description

Sets a new module name. By default the name is "Avisaro 2.0". Changing this name might be useful in some situations e.g. identifying different modules easily by looking at their web pages.

Parameters

A single word that is the new module name.

Return Value

ERR_OK (0) if the new name was accepted.
ERR_LENGTH (5) if name was too long.

Example

NAME Andromeda 

Assigns the new name "Andromeda"

Remarks

The name is stored into NVRAM and changed immediately. No reboot is necessary.

NAME?

Description

The NAME? command can be used to query the module name (that was set by e.g. the NAME command). The name of the module will be sent to the active I/O interface.