Avisaro Online Documentation - Wiki
Impressum Kontakt Sitemap

Network: W/LAN

WLAN
WLAN Settings (click to enlarge)

SSID

  • Enter the WLAN network name, called SSID.

Mode

  • Infrastructure: Select this if Avisaro WLAN should connect to an Access Point
  • Adhoc: Select this if Avisaro WLAN should connect directly to another Avisaro WLAN product or notebook computer

Channel

  • If Mode is set to "Infrastructure" this setting is ignored
  • If Mode is set to "Adhoc", enter here the same channel as the other communication partner is using

Encryption

  • None: No encryption
  • WEP40: "64 bit WEP" encryption
  • WEP104: "128 bit WEP" encryption
  • WPA/PSK: Encryption with WPA (TKIP) and Preshared Key (only for Mode = Infrastructure)
  • WPA2/PSK: Encryption with WPA (AES) and Preshared Key (only for Mode = Infrastructure)

Power Safe Mode

  • Enables Power Safe Mode (only for Mode = Infrastructure)

WEP Key

  • WEP40: Enter 10 HEX values. (The web-Page might add additional number, nevertheless only the first 10 digits remain relevant!)
  • WEP104: Enter 26 HEX values. (recommended) 

To convert ASCII values to HEX values, use i.e. website www.asciitable.com.

WPA Pass Phrase

Enter WPA pass phrase - same as on Access Point. Use WPA encryption only with Access Points.