Power up Avisaro Box 2.0

All boxes

The Avisaro 2.0 "Box" products are powered with a DC voltage of 6V - 32V.

Use the power supply shipped with the product or supplied by Avisaro, a 12V or 24V supply of a car or a truck or any other suitable source. The WLAN products require about 1W, the Logger products about 0.5W of power.

The "Box" is shipped either with a barrel connector or with a WAGO connector to supply power. The position of the power pins at the WAGO is the same for RS232, CAN or any other interface.

RS232 default settings

CAN default settings

Baudrate: 125 kbits/s
CAN ID send: 49 (hex)
CAN ID receive: 49 (hex)

Wireless LAN

To have a data connection via wireless LAN the PC and the Avisaro Box have to be either part of the same WLAN network. Then a software like Hyperterminal or Avisaro DIAG or any specific software can build up a TCP connection to the device. In alternation the box can communicate with other Avisaro devices. For a CAN UDP connection the IP address of the PC can be specified by the script page of the administration web page.