Avisaro Online Documentation - Wiki
Impressum Kontakt Sitemap

PT1000 Temperature Sensor Input

2x RS232

The Avisaro PT1000 temperature element Logger or Device Server comes with a WAGO connector for Sensor and Power. An aditional barrel connector is provided for alternative power supply.

WAGO

WAGO Connector

The box comes with a WAGO connector, the pin layout is as follows:

  1. PT1000 Temperature Sensor
  2. PT1000 Temperature Sensor
  3. not connected 1)
  4. not connected 2)
  5. Supply voltage (6 - 32V)
  6. Supply Ground (GND)
1) In some customized products, this is a 24V digital signal input

2) In some customized products, this is the ground (GND) for digital signal input

WAGO



Cable are connected with the WAGO 734 series connectors. In most product configurations, those adapters are shipped with the box. Check the 'scope of delivery' list. Details to the connectors are found Mehr here.

PT1000 Temperature Sensor Input and RS232 with D-Sub Connector

2x RS232

The Avisaro PT1000 temperature element Logger or Device Server comes with a D-Sub connector for Sensor, RS232 Date and Power. An aditional barrel connector is provided for alternative power supply.

RS232 SubD

Standard SubD-9 connector (male)

1.) RS232 - DCD
2.) RS232 - RxD
3.) RS232 - TxD
4.) PT1000 Sensor Element 
5.) Signal Ground GND
6.) PT1000 Sensor Element 
7.) RS232 - RTS Signal
8.) RS232 - CTS Signal
9.) Supply voltage input (6 - 32 V) (usually "Ring Indicator")

Barrel Connector

Barrel


The barrel connector on the WAGO-SubD adapter is layouted as follows. Supply voltage is 6 - 32 V.

 

Diameter of the connector is 2.1mm.