Avisaro Online Documentation - Wiki
Impressum Kontakt Sitemap

Firmware Updates

"Standard" and "Extended" Firmware

Firmware versions 5.10 and higher supports two hardware versions. The "extended" Base Module has more memory and supports more functions than the "standard" Base Module. The Extended Base Modules were shipped after Dezember 2010. A standard firmware can run on an extended Base Module , but not the other way arround.

Firmware Versions are encoded as follows:

a.bb.c    d.e

with

a : main firmware number and bb = minor version number

c : "1" = standard firmware, "2" extended firmware 

 

d : main hardware number

e : "0" = standard hardware, "1" =  extended hardware

 

Example:

5.10.1 2.1 = Standard Firmware Version 5.10 on a extended Base Module

 

Draft Firmware Version (click to open)

Download DRAFT Firmware

This firmware version is provided as DRAFT version. Do not use it for production as it did not went through regression tests. Use it, if particular add-ons or bug fixes are of interest to you.

  • no DRAFT version available

 

Download Firmware v5.10

Date: 2011/05/09

  • Fixed: DHCP Client Bugfix (longer timeouts)
  • Fixed: CAN problem when two many errors blocks sending
  • Changed: Max number of Goto/Gosub increased to 60
  • Changed: SCAN Command operates in background 
  • Changed: Pull-Up on port pins reduced, added Pull-Up on SPI port to SD Cards
  • Changed: Internal buffer increased to 2k when writing to SD Card
  • Added: WPS (Wireless Protected Setup)  (Mehr more) (extended)
  • Added: HSET command defines FIFO sizes for auxiliary interfaces
  • Added: Receive Fifo for auxiliary SPI Master mode
  • Added: Firmware Upload for "Extended Base Boards"
Firmware 5.10 (standard) Firmware 5.10 (standard) (206.4 kB)
Firmware 5.10 (extended) Firmware 5.10 (extended) (225.9 kB)
Older Firmware Versions

Download Firmware v4.87

Date: 2010/04/20

  • Fixed: ADC sampling bit rate to 10 bit
  • Fixed: Limit in packet length on LAN interface (fixes speed issue in Bridging mode)
  • Fixed: Firmware update issue when Bridging mode is active
  • Fixed: USB direct mode
  • Fixed: RS232 auxiliary port
  • Fixed: Possible hanging 'close' command when scheduling not zero
  • Fixed: FSYNC writes 'left over bytes' too
  • Changed: Disabled Pull-Up when using ADC
  • Changed: DHCP Server does not issue 0 and 255.
  • Changed: Prompt is issued after termination of Script
  • Changed: Command "ver" issues hardware version in addition to software version
  • Changed: Speed up of SD card detection and LOC/LOF report
  • Changed: ping timeout reduced to 3 seconds
  • Added: Hardware "Reset to Default" using a shortcut on Pin 17/18 (MISO, MOSI) (Mehr more)
  • Added: IP DHCP RESET to reset DHCP Server
  • Added: Master-SPI am SPI #1 (Mehr more)
  • Added: BASIC "status" command to check send IIC buffer status (Mehr more)
Firmware 4.87 Firmware 4.87 (205.9 kB)

Download Firmware v4.54

Date: 2009/12/02

  • Added: RS232 parity bit information available (for use additional mark/space flag).(RS232: Mehr more)
  • Added: I2C Slave Funktion as 2nd data interface (auxiliary port) in scripts. (Mehr more)
  • Fixed: Bug I2C (master) communication
  • Fixed: Bug in RS232 Errlog functionality
Firmware 4.54 Firmware 4.54 (202.6 kB)

Download Firmware v4.43

Date: 2009/09/25

  • Added: Ability to log RS232 and CAN bus errors (RS232: Mehr more) (CAN: Mehr more)
  • Added: CAN and RS232 RX enabled after RESTART CLEAR (Mehr more)
  • Improved: Scripting EXEC command is non blocking with file operations
  • Improved: BASIC runs continuously while WLAN is scanning
  • Changed: Pull-Up strength reduced on external SPI
  • Changed: UDP packets to address 0.0.0.0 are silently discarded
  • Changed: Precision of RS232 baud rates (Mehr more)
  • Fixed: Possible race condition in FSYNC
  • Fixed: Xon/Xoff behaviour for data coming from module 
Firmware 4.43 Firmware 4.43 (201.1 kB)

Download Firmware v4.25

Date: 2009/05/28
  • Added: Buffered mode for streaming (Mehr more)
  • Added: Packet command to use buffered SD card writing (Mehr more)
  • Added: Special Ad-Hoc WLAN mode for large networks (Mehr more)
  • Changed: Relaxed password protection for recovery mode (Mehr more)
Firmware 4.25 Firmware 4.25 (199.5 kB)

Download Firmware v4.18

  • Added: SPI Speed increased (Mehr more)
  • Added: BASIC Scripting memory allocation is variable (Mehr more)
  • Added: Run Scripts temporarily (Mehr more)
  • Added: Background Filesystem Flush (Mehr more)
  • Fixed: ARP requests and UDP data conflict
Firmware 4.18 Firmware 4.18 (200.0 kB)

Download Firmware v4.9

  • Fixed: Adhoc Mode allows 802.11b and g
  • Fixed: SPI Speed increased with ack sending amount of free buffer
  • Fixed: Behaviour with some Kingston SD Cards
  • Added: Files gets flushed when it is created

tl_files/Avisaro_Icons/zip-icon-30.jpgFirmware 4.09 DRAFT (196.4 kB)

Download Firmware v4.1

  • Fixed: Media size information beyond 4 GByte (Commands return kByte instead of Bytes now)
  • Added: Dual CAN interfaces. Support for automotive TJA1041AT CAN controller
  • Added: PWM output and analog input

tl_files/Avisaro_Icons/zip-icon-30.jpgFirmware 4.01 DRAFT (196.4 kB)

Download Firmware v3.51

  • Fixed: Power Save Mode for Wifi
  • Fixed: Relaxed handling of lost beacons in adhoc wifi connections
  • Added: BASIC command to format dec numbers to hex
  • Added: I/O port control

tl_files/Avisaro_Icons/zip-icon-30.jpgFirmware 3.51 DRAFT (196.4 kB)

Download Firmware v3.46

  • Added: Command Interface on website
  • Added: Customizing of website (hiding of entries)

tl_files/Avisaro_Icons/zip-icon-30.jpgFirmware 3.46 DRAFT (196.4 kB)

Download Firmware v3.43

  • Fixed: Modulo operator
  • Fixed: Exessive memory allocation for string operators

tl_files/Avisaro_Icons/zip-icon-30.jpgFirmware 3.43 DRAFT (196.4 kB)