Reset to default via button

All boxes, cubes or Avisaro Connector Boards can be reset to default by holding the button during boot period:

boxes with RS232: 

• Disconnect the Avisaro device 
• Press and hold the black button next to the two LED's 
• Connect the power to the Avisaro device
• Hold the button  about two seconds - the green LED turns off 
• Release the button 

The product is now in default state. The script is still stored but disabled. To restart the script use the known ways to do so - for example by SD Card or Webpage.

boxes with CAN:

• Disconnect the Avisaro device 
• Press and hold the black button next to the two LED's 
• Connect the power to the Avisaro device
• Hold the button  about one minute
• Release the button 

The product is now in default state. The script is still stored and active. The green LED still turns on.