Configuration via web interface

The build-in web site provides an easy way to configure the Avisaro device. The web site is only available when the device is equipped with a WLAN or LAN interface.

Connect to WLAN

An important step is to get the WLAN connection set up correctly. The configuration is done through the website and during normal operation the WLAN connection must work fine.

The easiest way to connect to the default 'avisaro' network is to have your WLAN utility list all WLANs which can be seen. If Microsoft Windows is used, it looks similar to this screenshot.





Manually, the default WLAN settings can be entered as well:

WLAN settings

Configure TCP/IP

Firmware Versions v3.45 and later (20.11.2008):

The Avisaro Modules come with a build in DCHP server. That makes initial configuration easy: If the PC is set to "receive IP adress by DHCP", there is no need to change anything. Proceed with "Access to Website". If the PC has fixed IP adresses proceed as described here:

Previous Firmware Versions:

After WLAN is connected, the TCP settings must be configured. For initial setup, fixed IP adresses are used. In a lot of cases, a PC is set to receive its IP automatically (DHCP) - this needs to be changes temporarily. Change the TCP settings of your PC to match those (i.e. IP to *.70). The TCP default settings of the Avisaro products are as follows:

TCP/IP settings for WLAN interface

TCP/IP settings for LAN interface

IP: 192.168.0.75
Subnet: 255.255.255.0

Access to configuration website

Open an Internet Explorer, Firefox, ... and enter the IP adress fo the Avisaro product (WLAN: 192.168.0.74, Ethernet: 192.168.0.75)

The Login Page will show up. Default User is "admin", default password is "1234".
A description of all the configuration websites is shown  here.