Avisaro WLAN logger RS232 with 2x WAGO (C25833)
This WLAN logger box stores data coming from two RS232 interfaces on SD card and send the data via wireless LAN. The WLAN routine can be determined by the script. The data logger has a real-time clock, so that records can be provided in addition with the recording time. The device can be programmed freely through the exchange of the script.
 |
Data sheet |  |
Online-Dokumentation |
| Description | Details | Software | |
The Avisaro WLAN logger stores your technical data and transmits them via WLAN
- Automatic, stand-alone logging
- Data output on SD card and via WLAN
- Additional functions: timestamp, ring storage etc.
- Ready-to-use and easy to configure by script and webpage
 |
 |
| Description | Details | Software | |
CAN Interface
- Two CAN interface
- Massage format 2.0A and 2.0B
- "Listen Only" mode
- Active sending ánd receiving massages
- Baud rate up to 1 Mbit/s
- Load resistance switchable
- Configurable filter
Storage media:
- Card slot for SD and
SDHC cards up to 16 GB
- Almost all brands
- FAT32 Data systems, short (8.3)
file names
- Files readable directly at PC
WAGO connector type
- Two port terminals type WAGO 231
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub available
Power supply:
- via WAGO jacks
- Power supply: 6V - 32V
- Consumption: ca. 1.0 W incl. WLAN
Mechanical data:
- Messurements: 51 x 72 x 24 mm
- Weight: 120 g
- max. temperature: -30°C bis 85°C,
if the SD card manufacturer
made no constraints.
WLAN:
- 802.11 b/g, WPA + WEP
- Outdoor-range: 300 m
- Indoor-Rande: 30-50 m
| Description | Details | Software | |
Software settings (Scripts)
Scripts - small soft programs - control the behavior of logger. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. In delivery this logger script MR1 is installed by default.
MR1: Log in to file
This script RS232 stores the data in a file. All data from the RS232 interface are stored in the file "logdata.txt" - just as they are received on the interface. The data will not be changed - as ASCII or binairy. 
more
MR2: RS232 with timestamp
This script stores RS232 data together with a timestamp in a file. The box has a built-in real time clock. more
MR3: RS232 circular buffer
This script stores RS232 spread on multiple files. With completion of the memory card, the oldest file will be deleted - so a continuous recording is given.