Avisaro WLAN device CAN with D-Sub (W23133)
The WLAN device is able to send or receive CAN data via WLAN. It can communicate with any other WLAN station or Avisaro device to bridge distances. By using the Avisaro script language it possible to change formate, select the messages or make any requesting commands.
 |
Online-Documentation |
| Description | Details | Software | |
The Avisaro WLAN device transmits your technical data via WLAN
- Transmits and receives data via WLAN
- To bridge distances in the data flow
- Communications between moving units
- Relay stations for longer distances
- Ready-to-use and easy to configure by Web interface
 |
| Description | Details | Software | |
CAN Interface
- one CAN Interface
- Massage format 2.0A and 2.0B
- "Listen Only" mode
- Active sending ánd receiving massages
- Baud rate up to 1 Mbit/s
- Load resistance switchable
- Configurable filter
Mechanical data:
- Dimension: 51 x 72 x 24 mm
- Weight: 110 g
- max. temperature: -30°C bis 85°C,
D-Sub connector type
- one port
- Standard 9 pins D-Sub connector (male)
- Common pinout
- Power supply on D-Sub connector or hollow port
Power supply:
- via D-Sub connector or separate hollow plug
- Power supply: 6V - 32V
- Consumption: ca. 1.0 W incl. WLAN
- Real time clock internally buffered
WLAN:
- WLAN: 802.11 b/g, Sicherheit: WPA, WEP
- Outdoor: 300 m, Indoor 30-50m
- Infrastruktur Mode: Client + 'Fixed AP'
- Adhoc Mode: Standard + 'Mesh'
- WPS (automatic 'one button' setup)
- zeitliche Präzision: ca. 3 ms
| Description | Details | Software | |
Software settings (Scripts)
Scripts - small soft programs - control the behavior of the WLAN device. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. In delivery this logger script WC1 is installed by default.
more