Avisaro WLAN device module (W20511)
The WLAN module is able to forward data via WLAN. It provides a wide range of interfaces that can be used alternatively: like two CAN, two RS232, two RS485, an I2C or SPI. You can insert it directly on a motherboard with interface environment and voltage regulation. A corresponding environment offers the Avisaro connector board suitable to the module.
 |
Online-Documentation |
| Description | Details | Software | |
The Avisaro WLAN module is part of an engine family consisting of logger, WLAN and various port and carrier boards. This ensures a high flexibility of use. Inform yourself 
here.
The module is made for the integration in customers OEM devices. It is delivered without script due to the individuality of the environment. The customer can either use self-adapted scripts or standard scripts of Avisaro (see bullet 'Software').
Due to its compact and flexible construction it fits perfectly in the customers product concept as a standard component.
Properties:
- Module for integration in customers device
- Transmits and receives data via WLAN
- wide range of interfaces like RS232, CAN RS485, I2C, SPI
- modular extendable with a SD card slot
- Voltage regulator and interface environment (transceiver, TTL level) necessary at carrier board or by Avisaro connector board
- not pre-set as ready-to-use
| Description | Details | Software | |
CAN interface
- The module has two CAN-interfaces, thereof one with reduced
performance. As environment a transceiver or Avisaro
Connector Board is needed.
- Massage format 2.0A and 2.0B
- "Listen Only" mode
- Aktive sending and receiving of massages
- Baud rate up to 1 Mbit/s
- Signal will be exported as CAN Tx and Rx (3.3V TTL level)
- Mode controll for special CAN transceiver available
RS232 Interface
- The module has two RS232-Interfaces
- Baud rate: 1200 bit/s up to 1 Mbit/s
- 7/8 Data bits
- RTS/CTS and XON/XOFF flow controll
- Signals with TTL Level
I2C Interface
- Master and slave mode up to 400 kBit/s
Mechanical data:
- Dimensions: 37 x 32 mm, height: 10 mm
- Weight: 14g
- max. temperature: -30°C bis 85°C,
(note any restrictions of the SD card)
Power supply:
- Power supply: 3.3V (+/- 0.1)
- Consumption: appr. 1.0 W with WLAN
- Separated power pin for the real time clock
Module connection type
- The interface and the power
are connectable by a 2 x 12 socket board
in the usual 2.54 mm grid fed
WLAN:
- 802.11 b/g, WPA + WEP
- Outdoor-range: 300 m
- Indoor-Rande: 30-50 m
| Description | Details | Software | |
Scripts - small soft programs - control the behavior of logger. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via SD card or interface. This logger will be delivered without presetting of a script. Before use choose and install a script according to your needs.
WR1: RS232 to WLAN
This script connects a RS232 interface with WLAN to reach a PC or another Avisaro WLAN device. more