Avisaro WLAN device RS232 with D-Sub (W21133)
The WLAN device is able to send or receive RS232 data via WLAN. It can communicate with any other WLAN station or Avisaro device to bridge distances. By using the Avisaro script language it possible to change formate, select the messages or make any requesting commands.
 |
Online-Documentation |
| Description | Details | Software | |
The Avisaro WLAN device transmits your technical data via WLAN
- Transmits and receives data via WLAN
- To bridge distances in the data flow
- Communications between moving units
- Relay stations for longer distances
- Ready-to-use and easy to configure by Web interface
 |
| Description | Details | Software | |
RS232 Interface
- One RS232-Interface
- Baud rate 1200 bit/s to 1 Mbit/s
- 7/8 data bits
- RTS/CTS and XON/XOFF flow controll
WLAN:
- 802.11 b/g, WPA + WEP
- Outdoor-range: 300 m
- Indoor-Rande: 30-50 m
Mechanical data:
- Dimension: 51 x 72 x 24 mm
- Weight: 110 g
- max. temperature: -30°C bis 85°C,
D-Sub connector type
- one port
- Standard 9 pins D-Sub connector (male)
- Common pinout
- Power supply on D-Sub connector or hollow port
Power supply:
- via D-Sub connector or separate hollow plug
- Power supply: 6V - 32V
- Consumption: ca. 1.0 W incl. WLAN
- Real time clock internally buffered
| Description | Details | Software | |
Softwareeinstellungen (Scripte)
Scripts - small soft programs - control the behavior of device. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via webside or via interface. In delivery this device script WR1 is installed by default.
WR1: RS232 to WLAN
This script connects a RS232 interface with WLAN to reach a PC or another Avisaro WLAN device.
more