Avisaro WLAN device RS232 with 2x WAGO (W25833)
The WLAN device is able to send or receive RS232 data via WLAN. It can communicate with any other WLAN station or Avisaro device to bridge distances. By using the Avisaro script language it possible to change formate, select the messages or make any requesting commands. This devices comes with two RS232 interfaces on industrial plugs.
 |
Online-Documentation |
| Description | Details | Software | |
The Avisaro WLAN device transmits your technical data via WLAN
- Transmits and receives data via WLAN
- To bridge distances in the data flow
- Communications between moving units
- Relay stations for longer distances
- Ready-to-use and easy to configure by Web interface
 |
|
| Description | Details | Software | |
CAN Interface
- Two CAN interface
- Massage format 2.0A and 2.0B
- "Listen Only" mode
- Active sending ánd receiving massages
- Baud rate up to 1 Mbit/s
- Load resistance switchable
- Configurable filter
WAGO connector type
- Two port terminals type WAGO 231
- Industrial terminal for single cable
- Optional: Adapter from WAGO to D-Sub available
WLAN:
- 802.11 b/g, WPA + WEP
- Outdoor-range: 300 m
- Indoor-Rande: 30-50 m
Power supply:
- via WAGO jacks
- Power supply: 6V - 32V
- Consumption: ca. 1.0 W incl. WLAN
Mechanical data:
- Dimension: 51 x 72 x 24 mm
- Weight: 110 g
- max. temperature: -30°C bis 85°C,
| Description | Details | Software | |
Softwareeinstellungen (Scripte)
Scripts - small soft programs - control the behavior of device. It controls e.g. the format of the stored data or features like time stamp etc. Load scripts via webside or via interface. In delivery this device script WR1 is installed by default.
WR1: RS232 to WLAN
This script connects a RS232 interface with WLAN to reach a PC or another Avisaro WLAN device.
more