Accessories for Avisaro data logger "Series 4.0"

Industrial grade USB memory

USB memory stick with SLC technology. 4GB in size, extended temperature range.

Part no. Z0690  

For all Avisaro "Series 4.0" products

Internal GPS/GNSS receiver

Internal GPS/GNSS receiver with build-in antenna. To determine location, speed, altitude and the position of the time.

Part no. Z23011  

For Avisaro products "4.0 Shell" and "4.0 Silver", depending on product configuration

DIN rail fitting (series 4.0, premounted)

Holder for DIN rail. Supplied pre-assembled when ordered simultaneously. Retrofitting possible.

Part no. Z4912  

For Avisaro products "4.0 Sky" series

DIN rail fitting (series 2.0, premounted)

Holder for DIN rail. Supplied pre-assembled when ordered simultaneously. Retrofitting possible.

Part no. Z4912  

For Avisaro products "2.0 Box", "2.0 Cube" and "4.0 Silver" Series

Micro USB cable

Micro USB cable to configure the Avisaro Logger / Gateway "4.0". Cable is not included with the products as most likely there are plenty of them arround.

Part no. Z_____  

For all Avisaro "Series 4.0" products

Power supply

9V, 5W, DC wall plug power supply for 220V with Euro connector.

Part no. Z5112  

For all Avisaro products with barrel connector

RS232 cable set with D-Sub

Cable set consisting of 1x null modem socket/socket and 1x 1:1 extension plug/socket 

Part no. Z2540  

For all Avisaro products with RS232 interface and D-Sub connector

Webdesign-Agentur: b2i