RS232 Gateway with WiFi, UMTS/LTE in IP64 enclosure
Description
This IoT / M2M gateway forwards data from an RS232 interface over a network. Receiving end can be a PC, a mobile device or another gateway device. Suitable networks are local networks, a direct one-to-one connection or data transmission through the internet. Beside a 'live' data connection, a store-and-forward setup can be configured using i.e. FTP server.
- Data input via RS232 interface
- 'Live' data transmission or store-and-forward
- Forward text and binary data
- Regular TCP/IP or UDP/IP data transport
- High level protocoll such as MQTT and FTP
Part numbers
Part no: G41387: RS232 Gateway with UMTS/LTE modem, CAN and RS232 interface on M8 connectors
Part no: G41377: RS232 Gateway with UMTS/LTE modem, RS232 interface on gable glands
Scope of delivery: Gateway incl. mobile data modem, no SIM card, no USB memory stick
Technical details
RS232 Interface
- Industry standard RS232 interface(s)
- Baud rate 1200 bit/s to 1 Mbit/s
- Average processing rate max. 500 kbit/s
- 7/8 data bits, parity, stop bits
WiFi Interface
- Industry standard 802.11 b/g/n
- SoftAP, infrastructure mode
- 2.4 GHz band, 250m/50m range
- Security: WPA, WPA2
Cable terminals
- Water and dust resistant cable gland
- Screw terminals for cable ends
Storage medium (USB sticks)
- Slot for USB memory up to 512 GB
- All brands possible
- FAT32 file system, short (8.3) file names
- Files can be read directly on the PC
Mechanical data
- Measurements: 141 x 80 x 40 mm
- Weight: 270 g
- Ingress protection: IP66
- USB stick and mobile data modem internally
- Temperature: -30°C to 85°C (check memory stick for restrictions)
Mobile data (UMTS/LTE)
- LTE / UMTS modem with WiFi bridge
- For European networks, optional US networks
- Integrated antenna
- Regular sized SIM cards (not included)
Power Supply
- D-Sub version: Barrel connector and optional D-Sub
- Wago version: WAGO terminal
- "Silver" Version: Screw type terminal
- Supply voltage: 6V - 32V
- Consumption: approx. 0.5 bis 2 W depending on product options
- Buffered real-time-clock with build-in battery
Support, manuals and downloads
User manual
Comprehensive documentation for setup, configuration, pin layout: Avisaro 4.0 user manual (pdf)
Options and accessories
Micro USB cable for configuration
Regular micro USB cable to configure the Avisaro device. <more>
Option: Acceleration and Gyro sensor (IMU)
Internal 6 degree of freedom (6 DGOF) MEMs sensor. Part# E4P1A1. <more>
Internal GPS Receiver
Internal GPS/GNSS receiver module with integrated antenna. Part#: Z23011. <more>
Industrial grade USB stick
SLC memory, 4 GB, extended temperature, part#: Z0690. <more>