Data logger with RS485 and IP64 enclosure

Description

This data logger stores data records of two RS485 interfaces on USB storage media. The device is delivered ready for use. The data logger has a real time clock, so that the data sets can be provided with the storage time additionally.

The Avisaro data logger RS485 saves your technical data from the RS485 bus to USB stick.

  • Data input via RS485 bus
  • Additional functions: Time stamp etc.
  • Storage in infinite loop possible
  • Recording format freely definable (binary, ASCII)
  • Optional: WLAN for wireless data retrieval

Part numbers

Part no. M42076: Logger with RS485 for USB sticks (link: <shop>)

Part no. C42076: Logger with RS485 für USB sticks with WiFi for wireless access / upload (link: <Shop>)

Scope of delivery: Data logger, no accessories

Technical details

RS485 / RS422 Schnittstelle

  • Industry standard RS485 bus
  • Baudrate 1200 bit/s to 1 Mbit/s
  • Average effective data rate 500 kbit/s
  • 7/8 Data bits, parity, stop bits

Cable terminals

  • Water and dust resistant cable gland
  • Screw terminals for cable ends

  

 

Storage medium (USB sticks)

  • Slot for USB memory up to 512 GB
  • All brands possible
  • FAT32 file system, short (8.3) file names
  • Files can be read directly on the PC

 

Mechanical Data

  • Dimensions: 98 x 64 x 34 mm
  • Weight: 160 g
  • Protection class: IP66 (waterproof)
  • USB stick or SD card under screwed lid
  • max. Temperature: -30 ° C to 85 ° C, unless manufacturer of memory card has other restriction

Power Supply

  • D-Sub version:  Barrel connector and optional D-Sub
  • Wago version: WAGO terminal
  • "Silver" Version: Screw type terminal
  • Supply voltage: 6V - 32V
  • Consumption: approx. 0.5 bis 2 W depending on product options
  • Buffered real-time-clock with build-in battery

Support, manuals and downloads

User manual
Comprehensive documentation for setup, configuration, pin layout: Avisaro 4.0 user manual (pdf)

Options and accessories

Option: Industry standard "M12 connector"
Replaces the standard cable galnd. Part# Z23061. <more>

Option: Acceleration and Gyro sensor (IMU)
Internal 6 degree of freedom (6 DGOF) MEMs sensor. Part# E4P1A1. <more>

Internal GPS Receiver
Internal GPS/GNSS receiver module with integrated antenna. Part#: Z23011. <more>

Industrial grade USB stick
SLC memory, 4 GB, extended temperature, part#: Z0690. <more>

Webdesign-Agentur: b2i