Industrial grade USB memory
USB memory stick with SLC technology. 4GB in size, extended temperature range.
Part no. Z0690
For all Avisaro "Series 4.0" products
Internal GPS/GNSS receiver
Internal GPS/GNSS receiver with build-in antenna. To determine location, speed, altitude and the position of the time.
Part no. Z23011
For Avisaro products "4.0 Shell" and "4.0 Silver", depending on product configuration
DIN rail fitting (series 4.0, premounted)
Holder for DIN rail. Supplied pre-assembled when ordered simultaneously. Retrofitting possible.
Part no. Z4912
For Avisaro products "4.0 Sky" series
DIN rail fitting (series 2.0, premounted)
Holder for DIN rail. Supplied pre-assembled when ordered simultaneously. Retrofitting possible.
Part no. Z4912
For Avisaro products "2.0 Box", "2.0 Cube" and "4.0 Silver" Series
Micro USB cable
Micro USB cable to configure the Avisaro Logger / Gateway "4.0". Cable is not included with the products as most likely there are plenty of them arround.
Part no. Z_____
For all Avisaro "Series 4.0" products
Power supply
9V, 5W, DC wall plug power supply for 220V with Euro connector.
Part no. Z5112
For all Avisaro products with barrel connector
RS232 cable set with D-Sub
Cable set consisting of 1x null modem socket/socket and 1x 1:1 extension plug/socket
Part no. Z2540
For all Avisaro products with RS232 interface and D-Sub connector
WAGO cage clamp
Matching connector for single cable wires. Solid connection, easy to use.
Part no. CON0131
For all Avisaro products with WAGO interface